simos.app
Discussions
Compatibility
Discord
Dongle
Guide
Register
Tune Editor
Get the App
Guide
Technical documentation for simos.app, ECU software identification and flashing workflows. Use this index to find the relevant reference or procedure.
Start here
New to ECU flashing?
Read
Flashing Information
first. It covers the checks and precautions to review before starting a flash or unlock.
Articles
Reference material and step-by-step procedures.
Software identification
Understand boxcodes, EPK, ASW and CAL, and why an exact calibration match matters.
Boxcodes, EPK, ASW and CAL →
Flashing safety
Review the essential safety information before starting a flash or unlock.
Flashing Information →
Boot-mode recovery
Recover a Simos 18 ECU that OBD flashing can no longer reach, with the erase addresses for each version.
Boot-Mode Recovery →
ECU unlock
Prepare the ECU for flashing and choose the correct follow-up flash type.
Flash Unlock →
Flash types
Choose between CAL and full flash for calibration, patch or software changes.
CAL Flash and Full Flash →
DQ250
Flashing, immobilizer handling and torque-limit patches for DQ250 TCUs.
DQ250 flashing and immobilizer →
DSG swap
DQ200 and DQ250 wiring pinouts, terminal assignments and connector references.
DSG swap pinouts →
Simos 18 ECU
Pin assignments, the Easy Wastegate and WG N75 patches for wastegate control, and the Main Patch Map Switch.
Simos 18 ECU →
Simos 8 ECU
The Main Patch Map Switch for the Simos 8.5 in the 3.0 TFSI V6: torque and spark maps per slot, Launch Control and drive mode switching.
Simos 8 ECU →
MED17 ECU
The Main Patch Map Switch for Bosch MED17.5, MED17.5.2, MED17.5.21 and MED17.1.27: torque, boost and pedal maps per slot, Launch Control, rolling anti-lag and pops & bangs.
MED17 ECU →